A new machine helps you make cannabis extract at home—without blowing yourself up. The Source Turbo is the first of its kind closed-loop vacuum, pro-sumer level, alcohol extractor machine made by a Colorado-based company called ExtractCraft. The Source Turbo can likewise be utilized to create mind-boggling, superb Cannabis Oil that astounds one from the first. Traditionally evaporation for at home extraction has been Making oil couldn't be easier than using the Source Turbo. The simple steps are as follows: Step 1 – Soak cannabis in ethanol, this is called the “wash”.
the Home Source Cannabis Turbo Extract at Making with
It can also be very frustrating using a distiller because removing the oil from a vat that was actually designed to collect the waste from alcohol distillation is cumbersome, difficult, dangerously hot, and wasteful.
The ability to operate at low temperatures in an enclosed environment solves all the problems of the other devices. In addition to vastly improved safety, the quality of the extraction and concentrates are unmatched. Using such low temperatures for the entire process ensures all the good stuff that was extracted from the cannabis is saved, protected, and packed into the CO.
Higher quality, more potent medication will go further, last longer, and require you to use less overall, hence seriously increasing value and savings. What must be understood about the Source Turbo is the idea of affordability and value is more than just a price tag. Home extraction is very new and many people are applying old techniques and using equipment designed for other purposes in an ad hoc way. ExtractCraft started working on this specific process and designing solutions from the ground up creating never before seen custom technology from the ground up specifically for home extraction.
It was imagined, designed, developed, and brought to life in Colorado over three years of hard work with an absolute commitment to making people healthier. In addition to superior performance and groundbreaking technology there are even more reasons to invest in this machine.
ExtractCraft has taken customer service and customer satisfaction to a level that is rarely seen. All of this can be overwhelming and confusing at times, so if you have any questions you can shoot me an email at ichibancrafter gmail. Happy crafting and stay lifted! How much oil can it make in a batch or how much cannabis can it process in a batch? I think my readers are going to LOVE this gadget. A single batch is going to range from 1g-6g of final concentrate depending on a number of considerations.
First, the largest determinant of yield is the quality of the material you are working with. If you are working with high quality material there will be much more oil for the alcohol to harvest. Conversely, if you are working with low quality material then it will be impossible to attain high yields.
Also, what shape the material is in will also determine how much can be done at one time. If it is fluffy trim it will take much more ethanol to wash the material while broken up dense nugs will require substantially less. The fill line for running on turbo mode is about ml and running in normal mode is about ml max. Secondly, it depends on how well the crafter performs the extraction.
Third, tolerance for undesirables will effect your yield. If you keep waxes, fats, paraffin like rosin then your yields will be higher. Lastly, it depends on what you are making. If you are making something super clean like a herb extract for vaping then the yield will be lower than a really deep full plant medicinal extraction. The bonus about this process is you can actually perform both of these and double your expected output by making a clean vape extract with a first wash, then using the same plant material, perform a second wash to make a deeper medicinal extract.
Yes, and you will make much better edibles. I am a beekeeper who is looking for someone who has a Source Turbo anywhere in southern ON and would be interested in running a test batch of propolis tincture? I am willing to compensate you for your time and grain alcohol. I am using a buchner filter at 11 microns after my wash.
I notice a powder that collects on top of the filter. Is that quality product or just wax and lipids? Is my filter too fine?
What do you recommend and what should I do with this powder? I am making FECO for edibles. It could be a number of things. It would only be fats and lipids if you are winterizing. I use medium flow filter paper that is about 12 micron and slow paper that is about 3 micron, so there is no problem with what you are using.
While the original material you washed may be run again if it was good material to begin with, assuming that has been separated by straining, anything on the filter is waste material. There seems to be at least a few centimeters of waste on the filter. I am winterizing some of my wash now after filter as you recommended and will see tomorrow what that brings. It does not look like there is anything after 24 hours.
If anything it looks like some of the liquid was in fact water and has frozen vs. Is there any use for the powder? Hmmm, frozen water is problematic. Also, the fats and lipid will sink and settle toward the bottom, not float. The powder should be spent and waste material. For at-home extractions and personal use, the Source Turbo is a great option. The fact that the device is a self-contained system ensures that the ethanol solution and resulting product are together in one single unit.
That means that not only is clean-up much easier and less time-consuming, but the dangerous and extremely stinky fumes are safely contained. Therefore, lower temperatures are needed to process it about degrees Fahrenheit on average , which results in a highly terpene-potent product.
Combine that with the fact that this sweet device can make quality medicine in one batch and smokeable goodness in the next, and it becomes pretty tough to pass up for home use. While butane and supercritical CO2 were the standards for extraction for many years, ethanol extraction is slowly making its way to an industry standard with the high-quality, low-risk, and relatively inexpensive results it produces.
Sign-up for our free cannabis investment newsletter to discover the latest opportunities in the space. KCSA Strategic Communications utilizes public relations, social media, and investor relations strategies to tell stories, raise profiles, and protect reputations.
He has given talks on entrepreneurship at public universities and has spoken about […]. Ehave EHVVF is empowering the mental healthcare community with a next-generation of data-rich tools designed to improve patient management, diagnosis, and treatment.
We help marijuana businesses attract investors, customers B2B, B2C , capital, and media visibility. CFN launched in June of to initially serve the growing universe of publicly traded marijuana companies across North America.
Today, CFN Media is also the digital media choice for the emerging brands in the space. Matters discussed on this website contain forward-looking statements that are subject to certain risks and uncertainties that could cause actual results to differ materially from any future results, performance or achievements expressed or implied by such statements. Emerging Growth LLC dba TDM Financial, which owns CannabisFN, is not registered with any financial or securities regulatory authority and does not provide nor claims to provide investment advice or recommendations to readers of this release.
The Information contains forward-looking statements, i. Any forward looking statements we make in the Information are limited to the time period in which they are made, and we do not undertake to update forward looking statements that may change at any time; The Information is presented only as a brief "snapshot" of the Profiled Issuer and should only be used, at most, and if at all, as a starting point for you to conduct a thorough investigation of the Profiled Issuer and its securities and to consult your financial, legal or other adviser s and avail yourself of the filings and information that may be accessed at www.
For making specific investment decisions, readers should seek their own advice and that of their own professional advisers.
For full disclosure, please visit: A short time after we acquire the securities of the foregoing company, we may publish the favorable information about the issuer referenced above advising others, including you, to purchase; and while doing so, we may sell the securities we acquired. In addition, a third-party shareholder compensating us may sell his or her shares of the issuer while we are publishing favorable information about the issuer.
Understanding The Source Turbo by ExtractCraft
The Dizzy Grower brings you an informational how to video showing you step by step how to make botanical oils at home using The Source. The Source Turbo, seen here enjoyed by The Herbal Chef on Pot Pie, is a DIY extractions done at home that generally produce inferior concentrates. can help you extract essential oils from other plants and herbs to create comprehensive. Being a Medical Marijuana patient, I am always looking for new and different ways to 'intake' the mighty compounds that come from the.